15w dc-dc converter p15c-series output voltage up to 140v 4:1 wide input voltage range six-sided continuous shield high efficiency up to 86% standard 2" x 1.6" x 0.4" package fixed switching frequency model selection guide typ input nominal voltage [v dc ] input current full-load [ma] output voltage [v dc ] output current [ma] efficiency typ. [%] capacitor load max. [uf] single output p15c24s05 9 ... 36 822 5 3000 79 6800 p15c24s12 9 ... 36 801 12 1250 82 890 p15c24s15 9 ... 36 801 15 1000 82 570 p15c48s05 18 ... 75 411 5 3000 80 6800 p15c48s12 18 ... 75 401 12 1250 82 890 p15c48s15 18 ... 75 401 15 1000 82 570 p15c48s110 20 ... 72 382 110 140 84 - p15c48s140 20 ... 72 373 140 110 86 - dual output p15c24d05 9 ... 36 822 5 1500 80 2 x 1700 p15c24d12 9 ... 36 801 12 625 82 2 x 300 P15C24D15 9 ... 36 801 15 500 82 2 x 200 p15c48d05 18 ... 75 411 5 1500 80 2 x 1700 p15c48d12 18 ... 75 401 12 625 82 2 x 300 p15c48d15 18 ... 75 401 15 500 82 2 x 200 circuit diagram page 1 of 2 deutschland: schweiz: inselkammerstra?e 10 grndenstra?e 82 d-82008 unterhaching ch-8247 flurlingen tel.: 089 614 503-10 tel.: 052 647 42 00 e-mail: power@hy-line.de e-mail: power@hy-line.ch 6 (5) 8 (8) cl 7(7) + output r - trim down r - trim up - output + input remote on remote off - input 1 4 2 dc/dc - converter p15cxxxxx the output voltage can be externally trimmed by using the method shown below. ( ) for dual output trim http://www..net/ datasheet pdf - http://www..net/
15w dc-dc converter p15c-series specifications input voltage range 24v type : 9 ... 36 v dc 48v type : 18 ? 75 v dc hv type : 20 ? 72 v dc filter pi type input surge voltage for 100ms max. 24v type : 50 v dc max. 48v type : 100 v dc max. remote ctrl on: open or 3.5..12 v dc off : 0...1.2 v dc remote ctrl input current -2.5ma remote ctrl input reference -input output power 15w max voltage accuracy 2% trim adjustment range 10 % ripple and noise (at 20 mhz bw) 5, 12, 15 v type: 75 mvp-p 110 v type: 100mvp-p 140 v type: 250mvp-p short circuit protection hiccup, automatics recovery line voltage regulation 0.5% load voltage regulation 10% to full load single: 1% dual: 5% 110 v,140 v type: 1% transient response recovery time 500 s at 25 % load chance temperature coefficient 0.02% / c minimum load 10 % to maintain the specified regulation dimensions derating pin connections pin single dual 1 + input + input 2 - input - input 4 ctrl ctrl 5 no pin + output 6 + output common 7 - output - output 8 trim trim page 2 of 2 general efficiency see table switching frequency 300 khz, typ. isolation voltage 1600 v dc isolation resistance 10 9 ? min. isolation capacitance 300 pf, max. mtbf 2x10 6 hrs standard in accordance with en60950, iec60950, ul1950 environmental operating temperature -40 c to +85 c (with derating) storage temperature -55 c to +105 c maximum case temp. +100 c thermal impedance 10c/w 8.24 c/w with heat-sink 7g-0011a thermal shock mil-std-810d vibration 2g, 10-55 hz, 30 min., xyz-axis humidity 5% to 95% rh cooling free-air convection physical dimensions 2 x 1.6 x 0.4 inches 50.8 x 40.6 x 10.4 mm weight 48 g case material nickel-coated copper potting material epoxy (ul94-v0) conducted & radiated emissions en55022 level a deutschland: schweiz: inselkammerstra?e 10 grndenstra?e 82 d-82008 unterhaching ch-8247 flurlingen tel.: 089 614 503-10 tel.: 052 647 42 00 e-mail: power@hy-line.de e-mail: power@hy-line.ch life support policy : hy-line does not authorize the use o f any of its products for use in life support devices or systems without the express written approval of an officer of the company. life support systems are devices which support o r sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expect ed to result in significant injury to the user. rev: 04 / 2005 f a ll dimensions in inches (mm) pin pitch tolerance 0.014 (0.35) http://www..net/ datasheet pdf - http://www..net/
|
